build(deps): bump pyjwt from 1.7.1 to 2.13.0 in /src/test/resources/msc/python

[dependabot]

Bumps pyjwt from 1.7.1 to 2.13.0.

Release notes

Sourced from pyjwt's releases.

2.13.0

PyJWT 2.13.0 — Security Release

This release bundles five security fixes plus three additional hardening / spec-compliance changes. We recommend all users upgrade.

Security

• GHSA-xgmm-8j9v-c9wx — JWK JSON accepted as HMAC secret (algorithm confusion). HMACAlgorithm.prepare_key previously rejected PEM- and SSH-formatted asymmetric keys but did not catch a JWK passed as a raw JSON string. In a verifier configured with both symmetric and asymmetric algorithms in algorithms=[…] and a raw-JSON JWK as the key, an attacker could forge HS256 tokens using the JWK text as the HMAC secret. The guard has been extended to reject any JWK-shaped JSON. Reported by @​aradona91.

• GHSA-jq35-7prp-9v3f — Algorithm allow-list bypass with PyJWK / PyJWKClient. When verifying with a PyJWK, the caller's algorithms=[…] allow-list was checked against the token header alg as a string only; actual verification used the algorithm bound to the PyJWK. An attacker who controlled a registered JWKS key could sign with one algorithm and advertise another on the header. PyJWT now requires the token header alg to match the PyJWK's algorithm before verification. Reported by @​sushi-gif.

• GHSA-w7vc-732c-9m39 — DoS via base64 decode of unused payload segment when b64=false. For detached-payload JWS (b64=false), the compact-form payload segment was base64-decoded before being discarded in favor of the caller-supplied detached_payload. An attacker could inflate the unused segment to force CPU + memory cost without holding a valid signature. The segment is now required to be empty per RFC 7515 Appendix F, and is no longer decoded. Reported by @​thesmartshadow.

• GHSA-993g-76c3-p5m4 — PyJWKClient accepts non-HTTP(S) URIs. PyJWKClient.fetch_data passed its URI to urllib.request.urlopen, which by default also handles file://, ftp://, and data: schemes. An application that fed an attacker-influenced URI into PyJWKClient could be coerced into reading local files or reaching other unintended schemes. PyJWKClient now rejects any URI whose scheme isn't http or https. Reported by @​KEIJOT.

• GHSA-fhv5-28vv-h8m8 — PyJWKClient cache wiped on fetch error. A finally-block put(jwk_set=None) cleared the JWK Set cache whenever a fetch raised, turning a transient JWKS-endpoint outage into application-wide auth failure. The cache write was moved into the success path; transient errors no longer evict valid cached keys. Reported by @​eddieran.

Fixed

• Reject empty HMAC keys outright in HMACAlgorithm.prepare_key with InvalidKeyError instead of accepting them with only a warning. Defends against the os.getenv("JWT_SECRET", "") footgun. Thanks to @​SnailSploit and @​spartan8806 for the reports.
• Forward per-call options (including enforce_minimum_key_length) from PyJWT.decode through to PyJWS._verify_signature. The option was previously silently dropped between the two layers, so it only took effect when set on the PyJWT instance. Thanks to @​WLUB for the report.
• RFC 7797 §3 compliance for b64=false: the encoder now auto-adds "b64" to crit, and the decoder rejects tokens that set b64=false without listing it in crit. Thanks to @​MachineLearning-Nerd for the report.

Changed

• Migrate the dev, docs, and tests package extras to dependency groups, by @​kurtmckee in #1152.

Upgrade notes

Most fixes are invisible to correctly-configured callers. A few behavioral changes you may encounter:

• Empty HMAC keys now raise. If your app passed "" or b"" as a secret (often via a missing env var, e.g. os.getenv("JWT_SECRET", "")), encode/decode will now raise InvalidKeyError. This is the intended behavior — fix the configuration.
• PyJWK decoding now requires the token's alg to match the JWK's algorithm. Previously a mismatch was silently honored if the header alg appeared in the allow-list. Tokens that relied on this mismatch will now fail with InvalidAlgorithmError.
• PyJWKClient now rejects non-HTTP(S) URIs at construction time. Tests or dev environments that fetched JWKS from file:// URIs need to switch to a local HTTP server or load the JWKS by other means (e.g. construct PyJWKSet.from_dict(...) directly).
• b64=false tokens are now strictly RFC 7515 / 7797 compliant. Tokens with a non-empty compact-form payload segment, or that omit "b64" from crit, will be rejected. PyJWT-produced tokens always satisfy both invariants, so round-trips through PyJWT are unaffected.
• enforce_minimum_key_length set per-call now takes effect. Callers who passed options={"enforce_minimum_key_length": True} to jwt.decode() previously got no enforcement; they will now get InvalidKeyError on undersized keys, as documented.

Full changelog: jpadilla/pyjwt@2.12.1...2.13.0

2.12.1

What's Changed

• Add typing_extensions dependency for Python < 3.11 by @​jpadilla in jpadilla/pyjwt#1151

Full Changelog: jpadilla/pyjwt@2.12.0...2.12.1

2.12.0

Security

• Validate the crit (Critical) Header Parameter defined in RFC 7515 §4.1.11. by @​dmbs335 in GHSA-752w-5fwx-jx9f

... (truncated)

Changelog

Sourced from pyjwt's changelog.

v2.13.0 <https://github.com/jpadilla/pyjwt/compare/2.12.1...2.13.0>__

Security

- Reject JWK JSON documents passed as raw HMAC secrets in
  ``HMACAlgorithm.prepare_key`` to close an algorithm-confusion gap that
  the existing PEM/SSH guard did not cover. Reported by @aradona91 in
  `GHSA-xgmm-8j9v-c9wx <https://github.com/jpadilla/pyjwt/security/advisories/GHSA-xgmm-8j9v-c9wx>`__.
- Bind the JWT header ``alg`` to ``PyJWK.algorithm_name`` during
  verification so the caller's ``algorithms=[...]`` allow-list cannot be
  bypassed when decoding with a ``PyJWK`` / ``PyJWKClient`` key. Reported
  by @sushi-gif in `GHSA-jq35-7prp-9v3f <https://github.com/jpadilla/pyjwt/security/advisories/GHSA-jq35-7prp-9v3f>`__.
- Reject non-``http(s)`` URI schemes in ``PyJWKClient`` so attacker-
  influenced URIs cannot read local files or reach unintended schemes via
  urllib's default ``file://`` / ``ftp://`` / ``data:`` handlers. Reported
  by @KEIJOT in `GHSA-993g-76c3-p5m4 <https://github.com/jpadilla/pyjwt/security/advisories/GHSA-993g-76c3-p5m4>`__.
- Preserve the cached JWK Set on fetch errors in ``PyJWKClient.fetch_data``.
  The previous ``finally``-block ``put(None)`` pattern cleared the cache
  on any transient outage, turning one bad JWKS request into application-
  wide auth failure. Reported by @eddieran in `GHSA-fhv5-28vv-h8m8 <https://github.com/jpadilla/pyjwt/security/advisories/GHSA-fhv5-28vv-h8m8>`__.
- Skip the unconditional base64 decode of the compact-form payload segment
  when ``b64=false`` is set in the protected header, and require that
  segment to be empty (RFC 7515 Appendix F detached form). Closes an
  unauthenticated DoS amplifier. Reported by @thesmartshadow in
  `GHSA-w7vc-732c-9m39 <https://github.com/jpadilla/pyjwt/security/advisories/GHSA-w7vc-732c-9m39>`__.
Fixed

- Reject empty HMAC keys outright in ``HMACAlgorithm.prepare_key`` with
  ``InvalidKeyError`` instead of accepting them with only a warning.
  Thanks to @SnailSploit and @spartan8806 for independently flagging the
  footgun.
- Forward per-call ``options`` (including ``enforce_minimum_key_length``)
  from ``PyJWT.decode`` through to ``PyJWS._verify_signature`` so the
  option actually takes effect when set at the call site rather than only
  on the ``PyJWT`` instance. Thanks to @WLUB for the report.
- RFC 7797 §3 compliance for ``b64=false``: the encoder now auto-adds
  ``&quot;b64&quot;`` to the ``crit`` header parameter, and the decoder rejects
  tokens that set ``b64=false`` without listing it in ``crit``. Thanks to
  @MachineLearning-Nerd for the report.
Changed



Migrate the dev, docs, and tests package extras to dependency groups by @​kurtmckee in [#1152](https://github.com/jpadilla/pyjwt/issues/1152) &lt;https://github.com/jpadilla/pyjwt/pull/1152&gt;__

v2.12.1 &lt;https://github.com/jpadilla/pyjwt/compare/2.12.0...2.12.1&gt;__
</tr></table>

... (truncated)

Commits

• 7144e45 Apply ruff format
• d2f4bec Restore cast() calls with cross-version type: ignore for prepare_key
• 22f478c Remove redundant casts in RSAAlgorithm.prepare_key and `ECAlgorithm.prepare...
• 95791b1 Bundle security fixes and hardening into 2.13.0
• dcc27a9 [pre-commit.ci] pre-commit autoupdate (#1155)
• 9d08a9a [pre-commit.ci] pre-commit autoupdate (#1146)
• b87c100 Bump codecov/codecov-action from 5 to 6 (#1154)
• 40e3147 Migrate development extras to dependency groups (#1152)
• a4e1a3d Add typing_extensions dependency for Python < 3.11 (#1151)
• bd9700c Use PyJWK algorithm when encoding without explicit algorithm (#1148)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.

[github-actions]

Test Results

555 tests   555 ✅  1m 55s ⏱️
 36 suites    0 💤
 36 files      0 ❌

Results for commit 1c3dc83.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
⚠️ Please upload report for BASE (main@194825a). Learn more about missing BASE report.

Additional details and impacted files

@@           Coverage Diff           @@
##             main     #527   +/-   ##
=======================================
  Coverage        ?   68.85%           
  Complexity      ?     1003           
=======================================
  Files           ?       65           
  Lines           ?     4244           
  Branches        ?      743           
=======================================
  Hits            ?     2922           
  Misses          ?      983           
  Partials        ?      339           

Flag	Coverage Δ
integration-tests	68.85% <ø> (?)

Flags with carried forward coverage won't be shown. Click here to find out more.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[dependabot]

OK, I won't notify you again about this release, but will get in touch when a new version is available. If you'd rather skip all updates until the next major or minor version, let me know by commenting @dependabot ignore this major version or @dependabot ignore this minor version. You can also ignore all major, minor, or patch releases for a dependency by adding an ignore condition with the desired update_types to your config file.

If you change your mind, just re-open this PR and I'll resolve any conflicts on it.