docs(xdposchain): port JSONRPC documentation from XDPoSChain#37
Conversation
📝 WalkthroughWalkthroughThis PR adds comprehensive JSON-RPC API documentation for the XDPoSChain blockchain, introducing a root documentation structure with module-specific guides (XDPoS, admin, debug, eth, miner, net, rpc, txpool, web3) and example JSON response fixtures. The main documentation index is updated with a link to the new XDPoSChain section. Changes
Estimated code review effort🎯 2 (Simple) | ⏱️ ~10 minutes Poem
🚥 Pre-merge checks | ✅ 3✅ Passed checks (3 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing Touches🧪 Generate unit tests (beta)
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. Comment |
|
gzliudan
force-pushed
the
port-XDPoSChain-doc
branch
from
34d8887 to
08b6d42
Compare
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 10
Note
Due to the large number of review comments, Critical, Major severity comments were prioritized as inline comments.
🟡 Minor comments (12)
docs/XDPoSChain/eth/eth_getTransactionByHash_response.json-19-19 (1)
19-19:⚠️ Potential issue | 🟡 MinorFix the signature
svalue length in test data.The
svalue is 63 hex characters instead of 64 (32 bytes). Ethereum signature components must be 32-byte values. This same malformed value appears across multiple documentation files.Change
"s": "0x25df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2"to"s": "0x025df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2"(note the leading zero). Update all occurrences in eth_getTransactionByHash_response.json, eth_getBlockByHash_response.json, eth_getBlockByNumber_response.json, and eth.md.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth_getTransactionByHash_response.json` at line 19, The signature component "s" in the JSON test data is missing a leading zero (63 hex chars); locate the key "s" entries matching 0x25df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2 and replace them with the 32-byte value 0x025df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2 (add the leading zero) in eth_getTransactionByHash_response.json, eth_getBlockByHash_response.json, eth_getBlockByNumber_response.json and the eth.md examples so every occurrence of the malformed "s" is fixed.docs/XDPoSChain/debug/debug.md-236-236 (1)
236-236:⚠️ Potential issue | 🟡 MinorFix typo: "encoded for of" → "encoded form of"
✏️ Proposed fix
-The `getBlockRlp` retrieves the RLP encoded for of a single block. +The `getBlockRlp` retrieves the RLP encoded form of a single block.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` at line 236, Update the documentation sentence for the getBlockRlp description to correct the typo: replace "encoded for of" with "encoded form of" so the sentence reads "The getBlockRlp retrieves the RLP encoded form of a single block." Locate the occurrence referencing getBlockRlp in debug.md and make this wording change.docs/XDPoSChain/debug/debug.md-215-215 (1)
215-215:⚠️ Potential issue | 🟡 MinorFix typo: "ojbect" → "object"
✏️ Proposed fix
-result: ojbect GCStats +result: object GCStats🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` at line 215, Replace the misspelled token "result: ojbect GCStats" in the debug documentation with the correct spelling "result: object GCStats" so the type annotation reads properly; locate the exact string "result: ojbect GCStats" in debug.md and update it to "result: object GCStats".docs/XDPoSChain/rpc/rpc.md-14-14 (1)
14-14:⚠️ Potential issue | 🟡 MinorFix typo: "ojbect" → "object"
✏️ Proposed fix
-result: ojbect +result: object🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/rpc/rpc.md` at line 14, There's a typo in the RPC documentation where the response schema uses "result: ojbect"; update the documentation to correct the key value to "result: object" so the schema uses the correct word "object" (locate the "result" line in docs/XDPoSChain/rpc/rpc.md and replace "ojbect" with "object").docs/XDPoSChain/debug/debug.md-929-929 (1)
929-929:⚠️ Potential issue | 🟡 MinorFix typo: "meothod" → "method"
✏️ Proposed fix
-The `traceBlockFromFile` meothod accepts a file containing the RLP of the block. +The `traceBlockFromFile` method accepts a file containing the RLP of the block.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` at line 929, Fix the typo in the documentation sentence referring to traceBlockFromFile: change "meothod" to "method" in the line describing that traceBlockFromFile accepts a file containing the RLP of the block, ensuring the reference to traceBlockFromFile remains exact and unchanged.docs/XDPoSChain/net/net.md-72-74 (1)
72-74:⚠️ Potential issue | 🟡 MinorMinor: Missing period at end of description.
The description for
net_versionis missing a period at the end of the sentence.-The `version` method returns the devp2p network ID +The `version` method returns the devp2p network ID.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/net/net.md` around lines 72 - 74, The documentation sentence for the net_version method is missing a terminal period; update the description line "The `version` method returns the devp2p network ID" in the net_version/net.version section to append a period so it reads "...network ID." ensuring consistent punctuation for the `net_version` (version) method entry.docs/XDPoSChain/txpool/txpool.md-71-71 (1)
71-71:⚠️ Potential issue | 🟡 MinorFix typo: "addrress" should be "address".
-- addr: addrress, required +- addr: address, required🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/txpool/txpool.md` at line 71, Fix the typo in the documentation entry for the "addr" field: change the misspelled "addrress" to "address" so the line reads "addr: address, required" (update the string containing "addr: addrress, required" to the corrected wording).docs/XDPoSChain/txpool/txpool.md-18-18 (1)
18-18:⚠️ Potential issue | 🟡 MinorFix typo: "ojbect" should be "object".
This typo appears multiple times in the file (lines 18, 75, 119, 158).
-result: ojbect +result: object🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/txpool/txpool.md` at line 18, Replace the repeated misspelling "ojbect" with "object" throughout the txpool documentation; search for the exact token "result: ojbect" (appearing at multiple locations) and update each occurrence to "result: object" so all examples/fields (the documented result type) read correctly.docs/XDPoSChain/admin/admin..md-113-113 (1)
113-113:⚠️ Potential issue | 🟡 MinorFix typo: "filen name" should be "filename".
This typo also appears on line 148.
-- fn: string, required, filen name +- fn: string, required, filename🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/admin/admin`..md at line 113, Replace the typo "filen name" with "filename" in the documentation entry that reads "fn: string, required, filen name" (update both occurrences, including the one noted around the later duplicate) so the field description reads "fn: string, required, filename".docs/XDPoSChain/eth/eth.md-730-732 (1)
730-732:⚠️ Potential issue | 🟡 MinorCheck
eth_getLogsrange ordering in the example.Line 730 sets
fromBlock(0x22b2277) higher than Line 731toBlock(0x21b2277). This can produce confusing/empty results and weakens the example.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 730 - 732, The example for eth_getLogs has the fromBlock ("fromBlock") set numerically higher than toBlock ("toBlock"), which can return empty/confusing results; update the example so toBlock >= fromBlock (either swap the hex values or choose appropriate block ranges) so the range is valid and consistent with the eth_getLogs call.docs/XDPoSChain/eth/eth.md-1440-1442 (1)
1440-1442:⚠️ Potential issue | 🟡 MinorProvide a concrete response (or explicit “no sample available”) for
eth_getWork.The response block is empty, so this section is incomplete for integrators.
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 1440 - 1442, The eth_getWork section is missing a concrete response example; update the docs to either include a representative JSON-RPC response for eth_getWork (an array of three hex-encoded items: headerPowHash, seed, target — e.g., ["0x...", "0x...", "0x..."]) or explicitly state "no sample available" if the implementation does not return a sample; edit the eth_getWork response block in docs/XDPoSChain/eth/eth.md to add that sample or the explicit no-sample message so integrators have a clear expected output.docs/XDPoSChain/eth/eth.md-708-708 (1)
708-708:⚠️ Potential issue | 🟡 MinorFix spelling/wording issues that reduce API doc clarity.
Examples: Line 708/2021
ojbect→object, Line 834Teh→The, Line 876blcok→block, Line 2026aoptional→optional.Also applies to: 833-834, 876-876, 2021-2026
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` at line 708, Fix the spelling/wording mistakes in the API doc: replace "ojbect" with "object" in the phrase "crit: ojbect FilterCriteria" and correct other typos such as "Teh"→"The", "blcok"→"block", and "aoptional"→"optional"; search for the same misspellings (e.g., occurrences around the phrases "crit: ojbect FilterCriteria", "Teh", "blcok", "aoptional") and update them to the correct words to improve clarity and consistency in the documentation.
🧹 Nitpick comments (1)
docs/XDPoSChain/eth/eth_getBlockByHash_response.json (1)
1-1: Reformat JSON for readability.This file contains minified JSON on a single line, which is inconsistent with the other documentation fixture files that use pretty-printed formatting. For documentation purposes, the JSON should be formatted with proper indentation to improve readability and make it easier to understand the response structure.
♻️ Suggested formatting approach
Use a JSON formatter to pretty-print this file with 2-space indentation, consistent with other fixture files like
eth_getTransactionByHash_response.jsonandadmin_nodeInfo_response.json.You can format it with:
jq '.' docs/XDPoSChain/eth/eth_getBlockByHash_response.json > temp.json && mv temp.json docs/XDPoSChain/eth/eth_getBlockByHash_response.json🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth_getBlockByHash_response.json` at line 1, The JSON fixture is minified; reformat it to a pretty-printed JSON with 2-space indentation while preserving all values and structure (ensure top-level keys like "jsonrpc", "id", "result" and nested fields such as "transactions", "transactionsRoot", "stateRoot", "validators", "validator" remain unchanged), so arrays and objects (e.g., the "transactions" array and each transaction object) are expanded across multiple lines for readability and saved back to the file.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In `@docs/XDPoSChain/admin/admin`..md:
- Around line 1-3: The documentation file is incorrectly named "admin..md"
(contains a double dot); rename the file to "admin.md" so links and navigation
work correctly, update any references/imports that point to "admin..md" to use
"admin.md" (search for "admin..md" occurrences and replace them), and verify
documentation build to ensure no broken links remain.
In `@docs/XDPoSChain/debug/debug.md`:
- Around line 1185-1193: The JSON example for the RPC call to
"debug_writeMutexProfile" contains an invalid trailing comma in the "params"
array; remove the trailing comma after "mutex-profile.bin" so the params array
is valid JSON (i.e., change ["mutex-profile.bin",] to ["mutex-profile.bin"]) in
the curl snippet that posts the debug_writeMutexProfile request.
- Around line 1149-1157: The JSON payload for the RPC call to method
"debug_writeMemProfile" contains a trailing comma in the params array which
makes the JSON invalid; remove the trailing comma after "memory-profile.bin" in
the params array so the payload is valid JSON (i.e., ensure the params array is
["memory-profile.bin"] when invoking debug_writeMemProfile).
- Around line 463-471: The JSON payload for the curl call invoking method
"debug_preimage" contains a trailing comma in the "params" array which makes the
JSON invalid; edit the example so the "params" array has no trailing comma
(i.e., remove the comma after "hash") to produce valid JSON for the curl POST
request.
- Around line 286-295: Replace the incorrect RPC method name in the curl
example: change "debug_getModifiedAccountsByNumber" to
"debug_getModifiedAccountsByHash" so the example matches the section header and
the params ("start-hash", "end-hash") used by debug_getModifiedAccountsByHash;
update any nearby references in the same snippet to ensure consistency with the
debug_getModifiedAccountsByHash API name.
In `@docs/XDPoSChain/eth/eth_getBlockByNumber_response.json`:
- Around line 1-2: The file currently contains two separate JSON-RPC root
objects (each starting with {"jsonrpc":"2.0","id":1001,"result":{...}}) which
makes the file invalid JSON; fix by either wrapping both objects in a single
JSON array (e.g., [ {first object}, {second object} ]), or split them into two
files (e.g., eth_getBlockByNumber_response_1.json and
eth_getBlockByNumber_response_2.json), or remove one object and keep only the
single example needed so the file has a single JSON root value.
In `@docs/XDPoSChain/eth/eth.md`:
- Around line 808-819: The example curl JSON payloads are malformed: in the
eth_getStorageAt example remove the trailing comma after the params array so the
closing object is "}" not "},", ensure all object keys in other examples (e.g.,
the transaction-like payloads using keys from:, to:, gas:, etc.) are quoted as
JSON strings ("from", "to", "gas", "value", etc.), and add the missing comma
between the "value" field and the following "nonce" field. Locate examples by
the RPC method name eth_getStorageAt and by transaction payloads containing keys
from/to/value/nonce and fix those three mistakes so each -d JSON body is valid
JSON and copy/pasteable.
- Around line 1637-1639: In the eth_resend example update the incorrect EIP-1559
field name "maxPriorityPerGas" to the correct "maxPriorityFeePerGas"; locate the
JSON object in the eth_resend example (the block containing "maxFeePerGas") and
replace the key so the request uses "maxPriorityFeePerGas" to match Ethereum
clients and the rest of the docs.
In `@docs/XDPoSChain/miner/miner.md`:
- Line 8: The documentation for miner_setEtherbase incorrectly describes
getHashrate; update the miner_setEtherbase section to describe its actual
behavior by replacing the getHashrate text with a clear description of
miner_setEtherbase (what it does, required parameters, return value and
examples), and ensure the symbol miner_setEtherbase is referenced in the heading
and body so readers understand this RPC sets the coinbase/etherbase address for
mining.
In `@docs/XDPoSChain/README.md`:
- Line 6: The README contains a broken link "[admin](./admin/admin..md)" with
double dots; update the link target in the README (the admin link) to use the
correct filename (e.g., "./admin/admin.md" or the actual admin file name) so the
anchor reads "[admin](./admin/admin.md)" (fix the "admin..md" typo wherever that
symbol appears).
---
Minor comments:
In `@docs/XDPoSChain/admin/admin`..md:
- Line 113: Replace the typo "filen name" with "filename" in the documentation
entry that reads "fn: string, required, filen name" (update both occurrences,
including the one noted around the later duplicate) so the field description
reads "fn: string, required, filename".
In `@docs/XDPoSChain/debug/debug.md`:
- Line 236: Update the documentation sentence for the getBlockRlp description to
correct the typo: replace "encoded for of" with "encoded form of" so the
sentence reads "The getBlockRlp retrieves the RLP encoded form of a single
block." Locate the occurrence referencing getBlockRlp in debug.md and make this
wording change.
- Line 215: Replace the misspelled token "result: ojbect GCStats" in the debug
documentation with the correct spelling "result: object GCStats" so the type
annotation reads properly; locate the exact string "result: ojbect GCStats" in
debug.md and update it to "result: object GCStats".
- Line 929: Fix the typo in the documentation sentence referring to
traceBlockFromFile: change "meothod" to "method" in the line describing that
traceBlockFromFile accepts a file containing the RLP of the block, ensuring the
reference to traceBlockFromFile remains exact and unchanged.
In `@docs/XDPoSChain/eth/eth_getTransactionByHash_response.json`:
- Line 19: The signature component "s" in the JSON test data is missing a
leading zero (63 hex chars); locate the key "s" entries matching
0x25df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2 and replace
them with the 32-byte value
0x025df537fe481c63c7defaaaccdd91105a0088f720789ecf5728460a4c3c0fc2 (add the
leading zero) in eth_getTransactionByHash_response.json,
eth_getBlockByHash_response.json, eth_getBlockByNumber_response.json and the
eth.md examples so every occurrence of the malformed "s" is fixed.
In `@docs/XDPoSChain/eth/eth.md`:
- Around line 730-732: The example for eth_getLogs has the fromBlock
("fromBlock") set numerically higher than toBlock ("toBlock"), which can return
empty/confusing results; update the example so toBlock >= fromBlock (either swap
the hex values or choose appropriate block ranges) so the range is valid and
consistent with the eth_getLogs call.
- Around line 1440-1442: The eth_getWork section is missing a concrete response
example; update the docs to either include a representative JSON-RPC response
for eth_getWork (an array of three hex-encoded items: headerPowHash, seed,
target — e.g., ["0x...", "0x...", "0x..."]) or explicitly state "no sample
available" if the implementation does not return a sample; edit the eth_getWork
response block in docs/XDPoSChain/eth/eth.md to add that sample or the explicit
no-sample message so integrators have a clear expected output.
- Line 708: Fix the spelling/wording mistakes in the API doc: replace "ojbect"
with "object" in the phrase "crit: ojbect FilterCriteria" and correct other
typos such as "Teh"→"The", "blcok"→"block", and "aoptional"→"optional"; search
for the same misspellings (e.g., occurrences around the phrases "crit: ojbect
FilterCriteria", "Teh", "blcok", "aoptional") and update them to the correct
words to improve clarity and consistency in the documentation.
In `@docs/XDPoSChain/net/net.md`:
- Around line 72-74: The documentation sentence for the net_version method is
missing a terminal period; update the description line "The `version` method
returns the devp2p network ID" in the net_version/net.version section to append
a period so it reads "...network ID." ensuring consistent punctuation for the
`net_version` (version) method entry.
In `@docs/XDPoSChain/rpc/rpc.md`:
- Line 14: There's a typo in the RPC documentation where the response schema
uses "result: ojbect"; update the documentation to correct the key value to
"result: object" so the schema uses the correct word "object" (locate the
"result" line in docs/XDPoSChain/rpc/rpc.md and replace "ojbect" with "object").
In `@docs/XDPoSChain/txpool/txpool.md`:
- Line 71: Fix the typo in the documentation entry for the "addr" field: change
the misspelled "addrress" to "address" so the line reads "addr: address,
required" (update the string containing "addr: addrress, required" to the
corrected wording).
- Line 18: Replace the repeated misspelling "ojbect" with "object" throughout
the txpool documentation; search for the exact token "result: ojbect" (appearing
at multiple locations) and update each occurrence to "result: object" so all
examples/fields (the documented result type) read correctly.
---
Nitpick comments:
In `@docs/XDPoSChain/eth/eth_getBlockByHash_response.json`:
- Line 1: The JSON fixture is minified; reformat it to a pretty-printed JSON
with 2-space indentation while preserving all values and structure (ensure
top-level keys like "jsonrpc", "id", "result" and nested fields such as
"transactions", "transactionsRoot", "stateRoot", "validators", "validator"
remain unchanged), so arrays and objects (e.g., the "transactions" array and
each transaction object) are expanded across multiple lines for readability and
saved back to the file.
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: defaults
Review profile: CHILL
Plan: Pro
Run ID: a311a69f-fd7a-407c-b7d8-f8df219d3f34
📒 Files selected for processing (28)
docs/XDPoSChain/README.mddocs/XDPoSChain/XDPoS/XDPoS.mddocs/XDPoSChain/XDPoS/XDPoS_getLatestPoolStatus_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSignersAtHash_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSigners_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSnapshot_response.jsondocs/XDPoSChain/admin/admin..mddocs/XDPoSChain/admin/admin_nodeInfo_response.jsondocs/XDPoSChain/admin/admin_peers_response.jsondocs/XDPoSChain/debug/debug.mddocs/XDPoSChain/debug/debug_dumpBlock_response.jsondocs/XDPoSChain/debug/debug_gcStats_response.jsondocs/XDPoSChain/debug/debug_memStats_response.jsondocs/XDPoSChain/debug/debug_stacks_response.jsondocs/XDPoSChain/debug/debug_traceBlockByNumber_response.jsondocs/XDPoSChain/eth/eth.mddocs/XDPoSChain/eth/eth_getBlockByHash_response.jsondocs/XDPoSChain/eth/eth_getBlockByNumber_response.jsondocs/XDPoSChain/eth/eth_getBlockReceipts_response.jsondocs/XDPoSChain/eth/eth_getCode_response.jsondocs/XDPoSChain/eth/eth_getTransactionByHash_response.jsondocs/XDPoSChain/eth/eth_getTransactionReceipt_response.jsondocs/XDPoSChain/miner/miner.mddocs/XDPoSChain/net/net.mddocs/XDPoSChain/rpc/rpc.mddocs/XDPoSChain/txpool/txpool.mddocs/XDPoSChain/txpool/txpool_content.jsondocs/index.md
| # Module admin | ||
|
|
||
| The `admin` API gives you access to several non-standard RPC methods, which will allow you to have a fine grained control over your Geth instance, including but not limited to network peer and RPC endpoint management. |
There was a problem hiding this comment.
Filename contains double dot - should be admin.md instead of admin..md.
The file is named admin..md with two consecutive dots, which appears to be a typo. This will cause issues with documentation navigation and links.
Please rename the file to admin.md.
🧰 Tools
🪛 LanguageTool
[style] ~3-~3: Try using a synonym here to strengthen your writing.
Context: # Module admin The admin API gives you access to several non-standard RPC meth...
(GIVE_PROVIDE)
[grammar] ~3-~3: Use a hyphen to join words.
Context: ...ods, which will allow you to have a fine grained control over your Geth instance,...
(QB_NEW_EN_HYPHEN)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/admin/admin`..md around lines 1 - 3, The documentation file
is incorrectly named "admin..md" (contains a double dot); rename the file to
"admin.md" so links and navigation work correctly, update any references/imports
that point to "admin..md" to use "admin.md" (search for "admin..md" occurrences
and replace them), and verify documentation build to ensure no broken links
remain.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | ||
| "jsonrpc": "2.0", | ||
| "id": 1001, | ||
| "method": "debug_getModifiedAccountsByNumber", | ||
| "params": [ | ||
| "start-hash", | ||
| "end-hash" | ||
| ] | ||
| }' | jq | ||
| ``` |
There was a problem hiding this comment.
Wrong method name in curl example
The curl example calls debug_getModifiedAccountsByNumber but this section documents debug_getModifiedAccountsByHash. The method name in the example should match the section header.
🔧 Proposed fix
curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{
"jsonrpc": "2.0",
"id": 1001,
- "method": "debug_getModifiedAccountsByNumber",
+ "method": "debug_getModifiedAccountsByHash",
"params": [
"start-hash",
"end-hash"
]
}' | jq📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_getModifiedAccountsByNumber", | |
| "params": [ | |
| "start-hash", | |
| "end-hash" | |
| ] | |
| }' | jq | |
| ``` | |
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_getModifiedAccountsByHash", | |
| "params": [ | |
| "start-hash", | |
| "end-hash" | |
| ] | |
| }' | jq |
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` around lines 286 - 295, Replace the incorrect
RPC method name in the curl example: change "debug_getModifiedAccountsByNumber"
to "debug_getModifiedAccountsByHash" so the example matches the section header
and the params ("start-hash", "end-hash") used by
debug_getModifiedAccountsByHash; update any nearby references in the same
snippet to ensure consistency with the debug_getModifiedAccountsByHash API name.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | ||
| "jsonrpc": "2.0", | ||
| "id": 1001, | ||
| "method": "debug_preimage", | ||
| "params": [ | ||
| "hash", | ||
| ] | ||
| }' | jq | ||
| ``` |
There was a problem hiding this comment.
Remove trailing comma in JSON params array
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_preimage",
"params": [
- "hash",
+ "hash"
]
}' | jq📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_preimage", | |
| "params": [ | |
| "hash", | |
| ] | |
| }' | jq | |
| ``` | |
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_preimage", | |
| "params": [ | |
| "hash" | |
| ] | |
| }' | jq |
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` around lines 463 - 471, The JSON payload for
the curl call invoking method "debug_preimage" contains a trailing comma in the
"params" array which makes the JSON invalid; edit the example so the "params"
array has no trailing comma (i.e., remove the comma after "hash") to produce
valid JSON for the curl POST request.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | ||
| "jsonrpc": "2.0", | ||
| "id": 1001, | ||
| "method": "debug_writeMemProfile", | ||
| "params": [ | ||
| "memory-profile.bin", | ||
| ] | ||
| }' | jq | ||
| ``` |
There was a problem hiding this comment.
Remove trailing comma in JSON params array
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_writeMemProfile",
"params": [
- "memory-profile.bin",
+ "memory-profile.bin"
]
}' | jq📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_writeMemProfile", | |
| "params": [ | |
| "memory-profile.bin", | |
| ] | |
| }' | jq | |
| ``` | |
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_writeMemProfile", | |
| "params": [ | |
| "memory-profile.bin" | |
| ] | |
| }' | jq |
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` around lines 1149 - 1157, The JSON payload
for the RPC call to method "debug_writeMemProfile" contains a trailing comma in
the params array which makes the JSON invalid; remove the trailing comma after
"memory-profile.bin" in the params array so the payload is valid JSON (i.e.,
ensure the params array is ["memory-profile.bin"] when invoking
debug_writeMemProfile).
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | ||
| "jsonrpc": "2.0", | ||
| "id": 1001, | ||
| "method": "debug_writeMutexProfile", | ||
| "params": [ | ||
| "mutex-profile.bin", | ||
| ] | ||
| }' | jq | ||
| ``` |
There was a problem hiding this comment.
Remove trailing comma in JSON params array
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_writeMutexProfile",
"params": [
- "mutex-profile.bin",
+ "mutex-profile.bin"
]
}' | jq📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_writeMutexProfile", | |
| "params": [ | |
| "mutex-profile.bin", | |
| ] | |
| }' | jq | |
| ``` | |
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | |
| "jsonrpc": "2.0", | |
| "id": 1001, | |
| "method": "debug_writeMutexProfile", | |
| "params": [ | |
| "mutex-profile.bin" | |
| ] | |
| }' | jq |
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` around lines 1185 - 1193, The JSON example
for the RPC call to "debug_writeMutexProfile" contains an invalid trailing comma
in the "params" array; remove the trailing comma after "mutex-profile.bin" so
the params array is valid JSON (i.e., change ["mutex-profile.bin",] to
["mutex-profile.bin"]) in the curl snippet that posts the
debug_writeMutexProfile request.
| ```shell | ||
| curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ | ||
| "jsonrpc": "2.0", | ||
| "id": 1001, | ||
| "method": "eth_getStorageAt", | ||
| "params": [ | ||
| "0xfe3b557e8fb62b89f4916b721be55ceb828dbd73", | ||
| "0x0", | ||
| "latest" | ||
| ], | ||
| }' | jq | ||
| ``` |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
#!/bin/bash
# Verify all curl -d JSON payloads in this doc are parseable JSON.
python - <<'PY'
import json, re, pathlib
p = pathlib.Path("docs/XDPoSChain/eth/eth.md")
text = p.read_text()
for m in re.finditer(r"-d '(\{.*?\})'\s*\|\s*jq", text, flags=re.S):
payload = m.group(1)
line = text.count('\n', 0, m.start()) + 1
try:
json.loads(payload)
except Exception as e:
print(f"INVALID JSON near line {line}: {e}")
PYRepository: XinFinOrg/Docs
Length of output: 352
🏁 Script executed:
#!/bin/bash
# Extract content around the three error locations
echo "=== Around line 809 (snippet 808-820) ==="
sed -n '808,820p' docs/XDPoSChain/eth/eth.md
echo -e "\n=== Around line 1708 (snippet 1700-1725) ==="
sed -n '1700,1725p' docs/XDPoSChain/eth/eth.md
echo -e "\n=== Around line 1805 (snippet 1800-1820) ==="
sed -n '1800,1820p' docs/XDPoSChain/eth/eth.mdRepository: XinFinOrg/Docs
Length of output: 1518
Fix malformed JSON in request examples (copy/paste currently fails).
Three curl request examples contain invalid JSON that will break when executed:
- Line 818 has trailing comma before closing brace:
],→] - Lines 1713–1718 use unquoted object keys that must be quoted:
from:→"from", etc. - Line 1817 is missing a comma after the
"value"field before"nonce"
These payloads are invalid JSON and will cause curl requests to fail.
Proposed doc patch
@@
"params": [
"0xfe3b557e8fb62b89f4916b721be55ceb828dbd73",
"0x0",
"latest"
- ],
+ ]
}' | jq
@@
"params":[
{
- from: "0xb60e8dd61c5d32be8058bb8eb970870f07233155",
- to: "0xd46e8dd67c5d32be8058bb8eb970870f07244567",
- gas: "0x76c0",
- gasPrice: "0x9184e72a000",
- value: "0x9184e72a",
- input: "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675"
+ "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155",
+ "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567",
+ "gas": "0x76c0",
+ "gasPrice": "0x9184e72a000",
+ "value": "0x9184e72a",
+ "input": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675"
}
]
@@
"gas": "0x76c0",
"gasPrice": "0x9184e72a000",
"to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567",
"value": "0x9184e72a",
+ "nonce":"0x1"
}
]Also applies to: Lines 1708–1722, 1805–1818
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/eth/eth.md` around lines 808 - 819, The example curl JSON
payloads are malformed: in the eth_getStorageAt example remove the trailing
comma after the params array so the closing object is "}" not "},", ensure all
object keys in other examples (e.g., the transaction-like payloads using keys
from:, to:, gas:, etc.) are quoted as JSON strings ("from", "to", "gas",
"value", etc.), and add the missing comma between the "value" field and the
following "nonce" field. Locate examples by the RPC method name eth_getStorageAt
and by transaction payloads containing keys from/to/value/nonce and fix those
three mistakes so each -d JSON body is valid JSON and copy/pasteable.
| "maxFeePerGas": "0x5d21dba00", | ||
| "maxPriorityPerGas": "0x5d21dba00" | ||
| }, |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
# First, let's read the specific lines mentioned in the review
cat -n docs/XDPoSChain/eth/eth.md | sed -n '1630,1650p'Repository: XinFinOrg/Docs
Length of output: 594
🏁 Script executed:
# Search for all occurrences of both field names in the file
echo "=== Searching for maxPriorityPerGas ===" && \
rg "maxPriorityPerGas" docs/XDPoSChain/eth/eth.md -n && \
echo "=== Searching for maxPriorityFeePerGas ===" && \
rg "maxPriorityFeePerGas" docs/XDPoSChain/eth/eth.md -nRepository: XinFinOrg/Docs
Length of output: 901
🌐 Web query:
EIP-1559 transaction fee parameters field names correct specification
💡 Result:
The correct field names for EIP-1559 transaction fee parameters, as specified in the official EIP-1559 document, are "max_priority_fee_per_gas" and "max_fee_per_gas". These appear in positions 3 and 4 of the RLP-encoded TransactionPayload for transaction type 0x02 (EIP-2718 envelope). Full RLP structure: 0x02 || rlp([chain_id, nonce, max_priority_fee_per_gas, max_fee_per_gas, gas_limit, to, value, data, access_list, signature_y_parity, signature_r, signature_s]) - max_priority_fee_per_gas: Maximum fee per gas above the base fee to incentivize inclusion (priority fee/tip). - max_fee_per_gas: Maximum total fee per gas willing to pay (base fee + priority fee). This is consistently confirmed across official sources including the EIP specification, Ethereum.org developer docs, Yellow Paper, and client libraries (Web3.js, ethers.rs). The base_fee_per_gas is a block-level parameter, not a transaction field.
Citations:
- 1: https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1559.md
- 2: https://eips.ethereum.org/EIPS/eip-1559
- 3: https://www.ethereum.org/developers/docs/transactions/
- 4: https://ethereum.github.io/yellowpaper/paper.pdf
- 5: https://docs.web3js.org/api/web3-eth-accounts/interface/FeeMarketEIP1559TxData
- 6: https://docs.rs/ethereum/latest/ethereum/struct.EIP1559Transaction.html
- 7: https://docs.rs/ethers/latest/ethers/core/types/struct.Eip1559TransactionRequest.html
- 8: https://docs.web3js.org/api/web3-eth-accounts/class/FeeMarketEIP1559Transaction
Change maxPriorityPerGas to maxPriorityFeePerGas in the eth_resend example.
Line 1638 contains maxPriorityPerGas, which is incorrect. The correct EIP-1559 field name is maxPriorityFeePerGas (note the "Fee" component). This is consistently used elsewhere in the documentation (lines 226, 227, 1793) and is the standard field name across all Ethereum client libraries. The example as written will fail when submitted to an actual Ethereum node.
Proposed doc patch
- "maxPriorityPerGas": "0x5d21dba00"
+ "maxPriorityFeePerGas": "0x5d21dba00"📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "maxFeePerGas": "0x5d21dba00", | |
| "maxPriorityPerGas": "0x5d21dba00" | |
| }, | |
| "maxFeePerGas": "0x5d21dba00", | |
| "maxPriorityFeePerGas": "0x5d21dba00" | |
| }, |
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/eth/eth.md` around lines 1637 - 1639, In the eth_resend
example update the incorrect EIP-1559 field name "maxPriorityPerGas" to the
correct "maxPriorityFeePerGas"; locate the JSON object in the eth_resend example
(the block containing "maxFeePerGas") and replace the key so the request uses
"maxPriorityFeePerGas" to match Ethereum clients and the rest of the docs.
Add XDPoSChain API docs (admin/debug/eth/miner/net/rpc/txpool) with JSON response examples and update docs index navigation.
gzliudan
force-pushed
the
port-XDPoSChain-doc
branch
from
08b6d42 to
73693f4
Compare
gzliudan
changed the title
There was a problem hiding this comment.
Actionable comments posted: 18
♻️ Duplicate comments (8)
docs/XDPoSChain/debug/debug.md (4)
1091-1098:⚠️ Potential issue | 🟠 MajorRemove trailing comma in JSON params array.
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_writeMemProfile", "params": [ - "memory-profile.bin", + "memory-profile.bin" ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` around lines 1091 - 1098, Remove the trailing comma in the JSON params array for the RPC call to "debug_writeMemProfile": edit the curl payload so the "params" array contains only the string "memory-profile.bin" without a trailing comma (i.e., adjust the JSON object passed to the RPC method "debug_writeMemProfile" to be valid JSON).
1126-1133:⚠️ Potential issue | 🟠 MajorRemove trailing comma in JSON params array.
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_writeMutexProfile", "params": [ - "mutex-profile.bin", + "mutex-profile.bin" ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` around lines 1126 - 1133, The JSON payload for the RPC call using method "debug_writeMutexProfile" contains a trailing comma in the "params" array; remove the trailing comma after "mutex-profile.bin" so the params array is valid JSON (e.g., ["mutex-profile.bin"] instead of ["mutex-profile.bin",]) and ensure the curl -d body is valid JSON.
455-462:⚠️ Potential issue | 🟠 MajorRemove trailing comma in JSON params array.
Trailing commas in JSON arrays are invalid and will cause parsing errors.
🔧 Proposed fix
"method": "debug_preimage", "params": [ - "hash", + "hash" ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` around lines 455 - 462, The JSON payload for the RPC call to debug_preimage contains a trailing comma in the "params" array which makes the JSON invalid; remove the trailing comma after "hash" in the params array so the "params": ["hash"] is a valid JSON array and the curl request will parse correctly when invoking the debug_preimage method.
281-289:⚠️ Potential issue | 🟠 MajorWrong method name in curl example.
The curl example calls
debug_getModifiedAccountsByNumberbut this section documentsdebug_getModifiedAccountsByHash. The method name in the example should match the section header.🔧 Proposed fix
curl -s -X POST -H "Content-Type: application/json" ${RPC} -d '{ "jsonrpc": "2.0", "id": 1001, - "method": "debug_getModifiedAccountsByNumber", + "method": "debug_getModifiedAccountsByHash", "params": [ "start-hash", "end-hash" ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/debug/debug.md` around lines 281 - 289, The curl example uses the wrong RPC method name: replace the "method" field value debug_getModifiedAccountsByNumber with debug_getModifiedAccountsByHash in the example payload so it matches the section header; update the JSON-RPC snippet (the POST body shown in the curl command) to call "debug_getModifiedAccountsByHash" and keep the params format (start-hash, end-hash) unchanged.docs/XDPoSChain/eth/eth.md (4)
1666-1680:⚠️ Potential issue | 🟠 MajorQuote object keys in JSON example.
The transaction object contains unquoted keys which makes the JSON invalid. All keys must be quoted strings in valid JSON.
🔧 Proposed fix
"params":[ { - from: "0xb60e8dd61c5d32be8058bb8eb970870f07233155", - to: "0xd46e8dd67c5d32be8058bb8eb970870f07244567", - gas: "0x76c0", - gasPrice: "0x9184e72a000", - value: "0x9184e72a", - input: "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675" + "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155", + "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", + "gas": "0x76c0", + "gasPrice": "0x9184e72a000", + "value": "0x9184e72a", + "input": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675" } ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 1666 - 1680, The JSON in the eth_sendTransaction example has unquoted object keys (e.g., from, to, gas, gasPrice, value, input) which makes it invalid; update the payload so all property names in the params transaction object are quoted strings (e.g., "from", "to", "gas", "gasPrice", "value", "input") so the curl -d body is valid JSON and jq can parse it.
1761-1776:⚠️ Potential issue | 🟠 MajorAdd missing comma after "value" field.
The JSON object is missing a comma between the "value" and "nonce" fields.
🔧 Proposed fix
"gas": "0x76c0", "gasPrice": "0x9184e72a000", "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", - "value": "0x9184e72a" - "nonce":"0x1" + "value": "0x9184e72a", + "nonce": "0x1" } ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 1761 - 1776, The JSON payload for the eth_signTransaction RPC call is syntactically invalid because it's missing a comma after the "value" field; update the curl JSON block that calls "eth_signTransaction" to insert a comma between the "value" and "nonce" properties (i.e., ensure "value": "0x9184e72a", is followed by a comma before "nonce": "0x1") so the JSON parses correctly.
790-799:⚠️ Potential issue | 🟠 MajorRemove trailing comma in JSON request.
The JSON payload contains a trailing comma after the params array which makes the JSON invalid.
🔧 Proposed fix
"params": [ "0xfe3b557e8fb62b89f4916b721be55ceb828dbd73", "0x0", "latest" - ], + ] }' | jq🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 790 - 799, The JSON payload sent in the curl call for method eth_getStorageAt contains a trailing comma after the params array making the JSON invalid; remove the trailing comma after the closing curly brace of the JSON (the comma following the "params" array) so the payload is valid JSON while keeping the same "jsonrpc", "id", "method": "eth_getStorageAt", and "params" entries.
1587-1603:⚠️ Potential issue | 🟠 MajorChange
maxPriorityPerGastomaxPriorityFeePerGasin theeth_resendexample.Line 1598 contains
maxPriorityPerGas, which is incorrect. The correct EIP-1559 field name ismaxPriorityFeePerGas.🔧 Proposed fix
"maxFeePerGas": "0x5d21dba00", - "maxPriorityPerGas": "0x5d21dba00" + "maxPriorityFeePerGas": "0x5d21dba00" },🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@docs/XDPoSChain/eth/eth.md` around lines 1587 - 1603, The example JSON for the RPC method "eth_resend" uses the wrong EIP-1559 field name "maxPriorityPerGas"; update that field to "maxPriorityFeePerGas" in the request object (the same place where "maxFeePerGas" is set) so the parameters match the correct EIP-1559 naming; ensure only the key name is changed and the value remains unchanged.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In `@docs/XDPoSChain/admin/admin.md`:
- Line 113: Update the parameter description for the "fn" parameter in admin.md
to fix the spelling mistake: change "filen name" to "file name" so the line
reads "fn: string, required, file name"; locate the description referring to the
fn parameter to make this single-word correction.
- Line 148: Update the parameter description for "file" in the admin
documentation: change the text "filen name" to the correct spelling "file name"
wherever the parameter "file" is described (e.g., the line showing "- file:
string, required, filen name") so the docs read "- file: string, required, file
name".
- Line 401: Update the documentation sentence describing startWS to use "web
server" (two words) instead of "webserver"; locate the line referencing the
startWS administrative method in admin.md and change "WebSocket based JSON RPC
API webserver" to "WebSocket-based JSON-RPC API web server" (also consider
hyphenation for "WebSocket-based" and "JSON-RPC" while editing the startWS
method description).
In `@docs/XDPoSChain/debug/debug.md`:
- Line 875: Fix the spelling in the documentation for the traceBlockFromFile
method: change "meothod" to "method" in the description where the
`traceBlockFromFile` method is documented so the sentence reads "The
`traceBlockFromFile` method accepts a file containing the RLP of the block."
- Line 232: Fix the typo in the method description for getBlockRlp by changing
"The `getBlockRlp` retrieves the RLP encoded for of a single block." to "The
`getBlockRlp` retrieves the RLP encoded form of a single block." Ensure the
updated sentence replaces the existing description for getBlockRlp wherever it
appears.
- Line 212: Update the misspelled return type description "result: ojbect
GCStats" by correcting "ojbect" to "object" so the line reads "result: object
GCStats"; search for the exact string "result: ojbect GCStats" in the doc and
replace it accordingly to fix the typo.
In `@docs/XDPoSChain/eth/eth.md`:
- Line 855: Update the parameter description for blockNr in the docs entry
"blockNr: BlockNumber, required, blcok number" by correcting the typo "blcok" to
"block" so it reads "block number"; ensure the change is made where the symbol
"blockNr: BlockNumber" appears.
- Around line 813-814: Fix the typo in the method description for
getRawTransactionByBlockHashAndIndex by replacing "Teh" with "The" so the
sentence reads "The getRawTransactionByBlockHashAndIndex method returns the
bytes of the transaction for the given block hash and index."; locate the string
in the docs entry describing getRawTransactionByBlockHashAndIndex and update
that single word.
- Line 1972: Fix the spelling mistake in the parameter type description: change
"ojbect" to "object" in the line describing "crit: ojbect FilterCriteria" so it
reads "crit: object FilterCriteria" (referencing the "crit" parameter and
"FilterCriteria" type).
- Line 690: Fix the spelling mistake in the parameter description for
FilterCriteria: change "ojbect" to "object" in the line that reads "crit: ojbect
FilterCriteria, a filter object containing the following:" so it correctly reads
"crit: object FilterCriteria, a filter object containing the following:"; update
the string where "FilterCriteria" is described to ensure consistency.
- Line 1977: Fix the typo in the parameter description for "topics": change
"aoptional" to "optional" so the line reads "topics: optional, an array of 32
bytes DATA topics. Topics are order-dependent." Update the documentation entry
that defines the "topics" parameter to use the corrected word.
In `@docs/XDPoSChain/miner/miner.md`:
- Line 43: Update the method description in miner.md for the setExtra entry:
change the phrase "miner blocks" to "mining blocks" so the sentence reads that
setExtra sets the extra data a miner can include when mining blocks; ensure the
rest of the sentence remains unchanged and still notes the 32-byte cap and the
method name setExtra is referenced correctly.
In `@docs/XDPoSChain/rpc/rpc.md`:
- Line 14: The return type description for the "result" field contains a typo;
change the word "ojbect" to the correct spelling "object" in the RPC docs
(update the "result" line so it reads "result: object") to fix the spelling
error.
In `@docs/XDPoSChain/txpool/txpool.md`:
- Line 18: Fix the spelling in the return type description for "result" in
txpool.md: change the typo "ojbect" to "object" so the line reads "result:
object". Make sure the corrected word appears exactly where "result" is
described to avoid other typos.
- Line 75: Fix the typo in the return type description by changing "ojbect" to
"object" for the `result` entry in txpool.md so the documentation correctly
reads "result: object"; locate the `result: ojbect` line and update the spelling
only.
- Line 158: Fix the spelling mistake in the return type description by changing
the text "result: ojbect" to "result: object" in the documentation (look for the
exact string "result: ojbect" in txpool/txpool.md); update the line so the
return type is spelled correctly as "object" and save the file.
- Line 119: Fix the typo in the return type description for the "result" field
in txpool.md by replacing "ojbect" with the correct spelling "object" (search
for the "result: ojbect" line and update it to "result: object").
- Line 71: Fix the spelling in the parameter description for "addr" in
txpool.md: change the value "addrress" to "address" so the line reads "addr:
address, required" (look for the "addr" parameter entry in
docs/XDPoSChain/txpool/txpool.md).
---
Duplicate comments:
In `@docs/XDPoSChain/debug/debug.md`:
- Around line 1091-1098: Remove the trailing comma in the JSON params array for
the RPC call to "debug_writeMemProfile": edit the curl payload so the "params"
array contains only the string "memory-profile.bin" without a trailing comma
(i.e., adjust the JSON object passed to the RPC method "debug_writeMemProfile"
to be valid JSON).
- Around line 1126-1133: The JSON payload for the RPC call using method
"debug_writeMutexProfile" contains a trailing comma in the "params" array;
remove the trailing comma after "mutex-profile.bin" so the params array is valid
JSON (e.g., ["mutex-profile.bin"] instead of ["mutex-profile.bin",]) and ensure
the curl -d body is valid JSON.
- Around line 455-462: The JSON payload for the RPC call to debug_preimage
contains a trailing comma in the "params" array which makes the JSON invalid;
remove the trailing comma after "hash" in the params array so the "params":
["hash"] is a valid JSON array and the curl request will parse correctly when
invoking the debug_preimage method.
- Around line 281-289: The curl example uses the wrong RPC method name: replace
the "method" field value debug_getModifiedAccountsByNumber with
debug_getModifiedAccountsByHash in the example payload so it matches the section
header; update the JSON-RPC snippet (the POST body shown in the curl command) to
call "debug_getModifiedAccountsByHash" and keep the params format (start-hash,
end-hash) unchanged.
In `@docs/XDPoSChain/eth/eth.md`:
- Around line 1666-1680: The JSON in the eth_sendTransaction example has
unquoted object keys (e.g., from, to, gas, gasPrice, value, input) which makes
it invalid; update the payload so all property names in the params transaction
object are quoted strings (e.g., "from", "to", "gas", "gasPrice", "value",
"input") so the curl -d body is valid JSON and jq can parse it.
- Around line 1761-1776: The JSON payload for the eth_signTransaction RPC call
is syntactically invalid because it's missing a comma after the "value" field;
update the curl JSON block that calls "eth_signTransaction" to insert a comma
between the "value" and "nonce" properties (i.e., ensure "value": "0x9184e72a",
is followed by a comma before "nonce": "0x1") so the JSON parses correctly.
- Around line 790-799: The JSON payload sent in the curl call for method
eth_getStorageAt contains a trailing comma after the params array making the
JSON invalid; remove the trailing comma after the closing curly brace of the
JSON (the comma following the "params" array) so the payload is valid JSON while
keeping the same "jsonrpc", "id", "method": "eth_getStorageAt", and "params"
entries.
- Around line 1587-1603: The example JSON for the RPC method "eth_resend" uses
the wrong EIP-1559 field name "maxPriorityPerGas"; update that field to
"maxPriorityFeePerGas" in the request object (the same place where
"maxFeePerGas" is set) so the parameters match the correct EIP-1559 naming;
ensure only the key name is changed and the value remains unchanged.
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: defaults
Review profile: CHILL
Plan: Pro
Run ID: 1fdc0175-db68-42cd-8d54-d910d39e5abd
📒 Files selected for processing (29)
docs/XDPoSChain/README.mddocs/XDPoSChain/XDPoS/XDPoS.mddocs/XDPoSChain/XDPoS/XDPoS_getLatestPoolStatus_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSignersAtHash_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSigners_response.jsondocs/XDPoSChain/XDPoS/XDPoS_getSnapshot_response.jsondocs/XDPoSChain/admin/admin.mddocs/XDPoSChain/admin/admin_nodeInfo_response.jsondocs/XDPoSChain/admin/admin_peers_response.jsondocs/XDPoSChain/debug/debug.mddocs/XDPoSChain/debug/debug_dumpBlock_response.jsondocs/XDPoSChain/debug/debug_gcStats_response.jsondocs/XDPoSChain/debug/debug_memStats_response.jsondocs/XDPoSChain/debug/debug_stacks_response.jsondocs/XDPoSChain/debug/debug_traceBlockByNumber_response.jsondocs/XDPoSChain/eth/eth.mddocs/XDPoSChain/eth/eth_getBlockByHash_response.jsondocs/XDPoSChain/eth/eth_getBlockByNumber_response.jsondocs/XDPoSChain/eth/eth_getBlockReceipts_response.jsondocs/XDPoSChain/eth/eth_getCode_response.jsondocs/XDPoSChain/eth/eth_getTransactionByHash_response.jsondocs/XDPoSChain/eth/eth_getTransactionReceipt_response.jsondocs/XDPoSChain/miner/miner.mddocs/XDPoSChain/net/net.mddocs/XDPoSChain/rpc/rpc.mddocs/XDPoSChain/txpool/txpool.mddocs/XDPoSChain/txpool/txpool_content.jsondocs/XDPoSChain/web3/web3.mddocs/index.md
✅ Files skipped from review due to trivial changes (16)
- docs/XDPoSChain/XDPoS/XDPoS_getSignersAtHash_response.json
- docs/XDPoSChain/debug/debug_gcStats_response.json
- docs/XDPoSChain/XDPoS/XDPoS_getSigners_response.json
- docs/XDPoSChain/XDPoS/XDPoS_getSnapshot_response.json
- docs/XDPoSChain/eth/eth_getCode_response.json
- docs/XDPoSChain/README.md
- docs/XDPoSChain/web3/web3.md
- docs/XDPoSChain/eth/eth_getTransactionByHash_response.json
- docs/XDPoSChain/net/net.md
- docs/XDPoSChain/txpool/txpool_content.json
- docs/XDPoSChain/admin/admin_peers_response.json
- docs/XDPoSChain/eth/eth_getTransactionReceipt_response.json
- docs/XDPoSChain/eth/eth_getBlockByHash_response.json
- docs/XDPoSChain/admin/admin_nodeInfo_response.json
- docs/XDPoSChain/debug/debug_memStats_response.json
- docs/XDPoSChain/debug/debug_dumpBlock_response.json
🚧 Files skipped from review as they are similar to previous changes (3)
- docs/index.md
- docs/XDPoSChain/XDPoS/XDPoS_getLatestPoolStatus_response.json
- docs/XDPoSChain/eth/eth_getBlockByNumber_response.json
|
|
||
| Parameters: | ||
|
|
||
| - fn: string, required, filen name |
There was a problem hiding this comment.
Fix typo: "filen name" should be "file name".
The parameter description contains a spelling error.
✏️ Proposed fix
-- fn: string, required, filen name
+- fn: string, required, file name📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - fn: string, required, filen name | |
| - fn: string, required, file name |
🧰 Tools
🪛 LanguageTool
[grammar] ~113-~113: Ensure spelling is correct
Context: .... Parameters: - fn: string, required, filen name Returns: result: bool, indicatin...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/admin/admin.md` at line 113, Update the parameter description
for the "fn" parameter in admin.md to fix the spelling mistake: change "filen
name" to "file name" so the line reads "fn: string, required, file name"; locate
the description referring to the fn parameter to make this single-word
correction.
|
|
||
| Parameters: | ||
|
|
||
| - file: string, required, filen name |
There was a problem hiding this comment.
Fix typo: "filen name" should be "file name".
The parameter description contains a spelling error.
✏️ Proposed fix
-- file: string, required, filen name
+- file: string, required, file name📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - file: string, required, filen name | |
| - file: string, required, file name |
🧰 Tools
🪛 LanguageTool
[grammar] ~148-~148: Ensure spelling is correct
Context: ... Parameters: - file: string, required, filen name Returns: result: bool, indicatin...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/admin/admin.md` at line 148, Update the parameter description
for "file" in the admin documentation: change the text "filen name" to the
correct spelling "file name" wherever the parameter "file" is described (e.g.,
the line showing "- file: string, required, filen name") so the docs read "-
file: string, required, file name".
|
|
||
| ## Method admin_startWS | ||
|
|
||
| The startWS administrative method starts an WebSocket based JSON RPC API webserver to handle client requests. |
There was a problem hiding this comment.
Fix spacing: "webserver" should be "web server".
The method description should use two words instead of one.
✏️ Proposed fix
-The startWS administrative method starts an WebSocket based JSON RPC API webserver to handle client requests.
+The startWS administrative method starts a WebSocket-based JSON RPC API web server to handle client requests.📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| The startWS administrative method starts an WebSocket based JSON RPC API webserver to handle client requests. | |
| The startWS administrative method starts a WebSocket-based JSON RPC API web server to handle client requests. |
🧰 Tools
🪛 LanguageTool
[grammar] ~401-~401: Use a hyphen to join words.
Context: ...dministrative method starts an WebSocket based JSON RPC API webserver to handle c...
(QB_NEW_EN_HYPHEN)
[grammar] ~401-~401: Ensure spelling is correct
Context: ... starts an WebSocket based JSON RPC API webserver to handle client requests. Parameters:...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/admin/admin.md` at line 401, Update the documentation
sentence describing startWS to use "web server" (two words) instead of
"webserver"; locate the line referencing the startWS administrative method in
admin.md and change "WebSocket based JSON RPC API webserver" to "WebSocket-based
JSON-RPC API web server" (also consider hyphenation for "WebSocket-based" and
"JSON-RPC" while editing the startWS method description).
|
|
||
| Returns: | ||
|
|
||
| result: ojbect GCStats |
There was a problem hiding this comment.
Fix typo: "ojbect" should be "object".
The return type description contains a spelling error.
✏️ Proposed fix
-result: ojbect GCStats
+result: object GCStats📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| result: ojbect GCStats | |
| result: object GCStats |
🧰 Tools
🪛 LanguageTool
[grammar] ~212-~212: Ensure spelling is correct
Context: .... Parameters: None Returns: result: ojbect GCStats See <https://golang.org/pkg/ru...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` at line 212, Update the misspelled return
type description "result: ojbect GCStats" by correcting "ojbect" to "object" so
the line reads "result: object GCStats"; search for the exact string "result:
ojbect GCStats" in the doc and replace it accordingly to fix the typo.
|
|
||
| ## Method debug_getBlockRlp | ||
|
|
||
| The `getBlockRlp` retrieves the RLP encoded for of a single block. |
There was a problem hiding this comment.
Fix typo: "encoded for of" should be "encoded form of".
The method description contains a grammatical error.
✏️ Proposed fix
-The `getBlockRlp` retrieves the RLP encoded for of a single block.
+The `getBlockRlp` retrieves the RLP encoded form of a single block.📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| The `getBlockRlp` retrieves the RLP encoded for of a single block. | |
| The `getBlockRlp` retrieves the RLP encoded form of a single block. |
🧰 Tools
🪛 LanguageTool
[grammar] ~232-~232: Ensure spelling is correct
Context: ...getBlockRlp retrieves the RLP encoded for of a single block. Parameters: - numb...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/debug/debug.md` at line 232, Fix the typo in the method
description for getBlockRlp by changing "The `getBlockRlp` retrieves the RLP
encoded for of a single block." to "The `getBlockRlp` retrieves the RLP encoded
form of a single block." Ensure the updated sentence replaces the existing
description for getBlockRlp wherever it appears.
|
|
||
| Returns: | ||
|
|
||
| result: ojbect |
There was a problem hiding this comment.
Fix typo: "ojbect" should be "object".
The return type description contains a spelling error.
✏️ Proposed fix
-result: ojbect
+result: object📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| result: ojbect | |
| result: object |
🧰 Tools
🪛 LanguageTool
[grammar] ~18-~18: Ensure spelling is correct
Context: .... Parameters: None Returns: result: ojbect Example: Request: ```shell curl -s -X ...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/txpool/txpool.md` at line 18, Fix the spelling in the return
type description for "result" in txpool.md: change the typo "ojbect" to "object"
so the line reads "result: object". Make sure the corrected word appears exactly
where "result" is described to avoid other typos.
|
|
||
| Parameters: | ||
|
|
||
| - addr: addrress, required |
There was a problem hiding this comment.
Fix typo: "addrress" should be "address".
The parameter type description contains a spelling error.
✏️ Proposed fix
-- addr: addrress, required
+- addr: address, required📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - addr: addrress, required | |
| - addr: address, required |
🧰 Tools
🪛 LanguageTool
[grammar] ~71-~71: Ensure spelling is correct
Context: ...grouped by nonce. Parameters: - addr: addrress, required Returns: result: ojbect Ex...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/txpool/txpool.md` at line 71, Fix the spelling in the
parameter description for "addr" in txpool.md: change the value "addrress" to
"address" so the line reads "addr: address, required" (look for the "addr"
parameter entry in docs/XDPoSChain/txpool/txpool.md).
|
|
||
| Returns: | ||
|
|
||
| result: ojbect |
There was a problem hiding this comment.
Fix typo: "ojbect" should be "object".
The return type description contains a spelling error.
✏️ Proposed fix
-result: ojbect
+result: object📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| result: ojbect | |
| result: object |
🧰 Tools
🪛 LanguageTool
[grammar] ~75-~75: Ensure spelling is correct
Context: ...: addrress, required Returns: result: ojbect Example: Request: ```shell curl -s -X ...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/txpool/txpool.md` at line 75, Fix the typo in the return type
description by changing "ojbect" to "object" for the `result` entry in txpool.md
so the documentation correctly reads "result: object"; locate the `result:
ojbect` line and update the spelling only.
|
|
||
| Returns: | ||
|
|
||
| result: ojbect |
There was a problem hiding this comment.
Fix typo: "ojbect" should be "object".
The return type description contains a spelling error.
✏️ Proposed fix
-result: ojbect
+result: object📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| result: ojbect | |
| result: object |
🧰 Tools
🪛 LanguageTool
[grammar] ~119-~119: Ensure spelling is correct
Context: .... Parameters: None Returns: result: ojbect Example: Request: ```shell curl -s -X ...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/txpool/txpool.md` at line 119, Fix the typo in the return
type description for the "result" field in txpool.md by replacing "ojbect" with
the correct spelling "object" (search for the "result: ojbect" line and update
it to "result: object").
|
|
||
| Returns: | ||
|
|
||
| result: ojbect |
There was a problem hiding this comment.
Fix typo: "ojbect" should be "object".
The return type description contains a spelling error.
✏️ Proposed fix
-result: ojbect
+result: object📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| result: ojbect | |
| result: object |
🧰 Tools
🪛 LanguageTool
[grammar] ~158-~158: Ensure spelling is correct
Context: .... Parameters: None Returns: result: ojbect Example: Request: ```shell curl -s -X ...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@docs/XDPoSChain/txpool/txpool.md` at line 158, Fix the spelling mistake in
the return type description by changing the text "result: ojbect" to "result:
object" in the documentation (look for the exact string "result: ojbect" in
txpool/txpool.md); update the line so the return type is spelled correctly as
"object" and save the file.
2 participants
This PR adds comprehensive XDPoSChain RPC reference documentation and example JSON responses for key namespaces.
Impact:
Verification:
Summary by CodeRabbit
XDPoS,admin,debug,eth,miner,net,rpc,txpool, andweb3modules with method descriptions, parameter specifications, example requests, and sample responses.