[Aqara] Roller Shade T1S

drivers/SmartThings/zigbee-window-treatment/fingerprints.yml

@@ -29,6 +29,11 @@ zigbeeManufacturer:
     manufacturer: LUMI
     model: lumi.curtain.agl001
     deviceProfileName: window-treatment-aqara-curtain-driver-e1
+  - id: "LUMI/lumi.curtain.vagl02"
+    deviceLabel: Roller Shade Controller T1S
+    manufacturer: LUMI
+    model: lumi.curtain.vagl02
+    deviceProfileName: window-treatment-aqara-roller-shade-rotate
   - id: "REXENSE/KG0001"
     deviceLabel: Window Treatment
     manufacturer: REXENSE

drivers/SmartThings/zigbee-window-treatment/src/aqara/fingerprints.lua

@@ -5,7 +5,8 @@ local FINGERPRINTS = {
   { mfr = "LUMI", model = "lumi.curtain" },
   { mfr = "LUMI", model = "lumi.curtain.v1" },
   { mfr = "LUMI", model = "lumi.curtain.aq2" },
-  { mfr = "LUMI", model = "lumi.curtain.agl001" }
+  { mfr = "LUMI", model = "lumi.curtain.agl001" },
+  { mfr = "LUMI", model = "lumi.curtain.vagl02" }
 }
 
 return FINGERPRINTS

drivers/SmartThings/zigbee-window-treatment/src/aqara/roller-shade/can_handle.lua

@@ -1,8 +1,12 @@
 -- Copyright 2025 SmartThings, Inc.
 -- Licensed under the Apache License, Version 2.0
 
+local MODELS = {
+  ["lumi.curtain.aq2"] = true,
+  ["lumi.curtain.vagl02"] = true
+}
 local function roller_shade_can_handle(opts, driver, device, ...)
-  if device:get_model() == "lumi.curtain.aq2" then
+  if MODELS[device:get_model()] then
     return true, require("aqara.roller-shade")
   end
   return false

drivers/SmartThings/zigbee-window-treatment/src/aqara/roller-shade/init.lua

@@ -137,6 +137,7 @@ local aqara_roller_shade_handler = {
     }
   },
   can_handle = require("aqara.roller-shade.can_handle"),
+  sub_drivers = require("aqara.roller-shade.sub_drivers"),
 }
 
 return aqara_roller_shade_handler

drivers/SmartThings/zigbee-window-treatment/src/aqara/roller-shade/sub_drivers.lua

@@ -0,0 +1,8 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+local lazy_load_if_possible = require "lazy_load_subdriver"
+local sub_drivers = {
+  lazy_load_if_possible("aqara.roller-shade.t1s"),
+}
+return sub_drivers

drivers/SmartThings/zigbee-window-treatment/src/aqara/roller-shade/t1s/can_handle.lua

@@ -0,0 +1,11 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+local function t1s_can_handle(opts, driver, device, ...)
+  if device:get_model() == "lumi.curtain.vagl02" then
+    return true, require("aqara.roller-shade.t1s")
+  end
+  return false
+end
+
+return t1s_can_handle

drivers/SmartThings/zigbee-window-treatment/src/aqara/roller-shade/t1s/init.lua

@@ -0,0 +1,186 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+local capabilities = require "st.capabilities"
+local clusters = require "st.zigbee.zcl.clusters"
+local cluster_base = require "st.zigbee.cluster_base"
+local FrameCtrl = require "st.zigbee.zcl.frame_ctrl"
+local data_types = require "st.zigbee.data_types"
+local aqara_utils = require "aqara/aqara_utils"
+local window_treatment_utils = require "window_treatment_utils"
+
+local WindowCovering = clusters.WindowCovering
+local AnalogOutput = clusters.AnalogOutput
+
+local initializedStateWithGuide = capabilities["stse.initializedStateWithGuide"]
+local reverseRollerShadeDir = capabilities["stse.reverseRollerShadeDir"]
+local shadeRotateState = capabilities["stse.shadeRotateState"]
+local setRotateStateCommandName = "setRotateState"
+
+local MULTISTATE_CLUSTER_ID = 0x0013
+local MULTISTATE_ATTRIBUTE_ID = 0x0055
+local INIT_STATE_ATTRIBUTE_ID = 0x0407
+local DIRECTION_ATTRIBUTE_ID = 0x0400
+
+local ROTATE_UP_VALUE = 0x0006
+local ROTATE_DOWN_VALUE = 0x0005
+local SHADE_STATE_STOP = 2
+local SHADE_STATE_OPEN = 1
+local SHADE_STATE_CLOSE = 0
+local SHADE_STATE_BLOCKED = 4
+
+local function is_not_init(device)
+  -- True until the device reports that its travel points have been initialized
+  return device:get_latest_state("main", initializedStateWithGuide.ID, initializedStateWithGuide.initializedStateWithGuide.NAME) ~=
+    initializedStateWithGuide.initializedStateWithGuide.initialized.NAME
+end
+
+local function window_shade_level_cmd(driver, device, command)
+  -- Cannot be controlled if not initialized
+  if is_not_init(device) then return end
+  aqara_utils.shade_level_cmd(driver, device, command)
+end
+
+local function window_shade_open_cmd(driver, device, command)
+  -- Cannot be controlled if not initialized
+  if is_not_init(device) then return end
+  device:send_to_component(command.component, WindowCovering.server.commands.GoToLiftPercentage(device, 100))
+end
+
+local function window_shade_close_cmd(driver, device, command)
+  -- Cannot be controlled if not initialized
+  if is_not_init(device) then return end
+  device:send_to_component(command.component, WindowCovering.server.commands.GoToLiftPercentage(device, 0))
+end
+
+local function set_rotate_command_handler(driver, device, command)
+  device:emit_event(shadeRotateState.rotateState.idle({ state_change = true, visibility = { displayed = false } })) -- update UI
+
+  -- Cannot be controlled if not initialized
+  if is_not_init(device) then return end
+  local state = command.args.state
+  if state == "rotateUp" then
+    local message = cluster_base.write_manufacturer_specific_attribute(device, MULTISTATE_CLUSTER_ID,
+      MULTISTATE_ATTRIBUTE_ID, aqara_utils.MFG_CODE, data_types.Uint16, ROTATE_UP_VALUE)
+    message.body.zcl_header.frame_ctrl = FrameCtrl(0x10)
+    device:send(message)
+  elseif state == "rotateDown" then
+    local message = cluster_base.write_manufacturer_specific_attribute(device, MULTISTATE_CLUSTER_ID,
+      MULTISTATE_ATTRIBUTE_ID, aqara_utils.MFG_CODE, data_types.Uint16, ROTATE_DOWN_VALUE)
+    message.body.zcl_header.frame_ctrl = FrameCtrl(0x10)
+    device:send(message)
+  end
+end
+
+local function do_refresh(driver, device)
+  device:send(AnalogOutput.attributes.PresentValue:read(device))
+  device:send(cluster_base.read_manufacturer_specific_attribute(device, aqara_utils.PRIVATE_CLUSTER_ID, INIT_STATE_ATTRIBUTE_ID, aqara_utils.MFG_CODE))
+end
+
+local function init_state_handler(driver, device, value, zb_rx)
+  local state = value.value == 0x02 and initializedStateWithGuide.initializedStateWithGuide.initialized() or
+    initializedStateWithGuide.initializedStateWithGuide.notInitialized()
+  device:emit_event(state)
+end
+
+-- The position of this device is reported through the present value of the analog output
+-- cluster, where 0 is fully closed and 100 is fully open. The lift percentage of the window
+-- covering cluster is reported with the opposite polarity (100% = fully closed), so it is
+-- ignored here to keep the parent Aqara handler from emitting an inverted shade level.
+local function current_position_lift_percentage_handler(driver, device, value, zb_rx)
+end
+
+local function shade_state_report_handler(driver, device, value, zb_rx)
+  local state = value.value
+  -- update state ui
+  if state == SHADE_STATE_STOP or state == SHADE_STATE_BLOCKED then
+    -- read shade position to update the UI
+    device:send(AnalogOutput.attributes.PresentValue:read(device))
+    -- The device does not report the init state when its travel points have been set, so it is
+    -- re-read once each time the shade stops while the device is still not initialized.
+    if is_not_init(device) then
+      device:send(cluster_base.read_manufacturer_specific_attribute(device, aqara_utils.PRIVATE_CLUSTER_ID,
+        INIT_STATE_ATTRIBUTE_ID, aqara_utils.MFG_CODE))
+    end
+  elseif state == SHADE_STATE_OPEN then
+    device:emit_event(capabilities.windowShade.windowShade.opening())
+  elseif state == SHADE_STATE_CLOSE then
+    device:emit_event(capabilities.windowShade.windowShade.closing())
+  end
+end
+
+local function device_info_changed(driver, device, event, args)
+  if device.preferences ~= nil then
+    local reverseRollerShadeDirPrefValue = device.preferences[reverseRollerShadeDir.ID]
+    if reverseRollerShadeDirPrefValue ~= nil and
+      reverseRollerShadeDirPrefValue ~= args.old_st_store.preferences[reverseRollerShadeDir.ID] then
+      device:send(cluster_base.write_manufacturer_specific_attribute(device, aqara_utils.PRIVATE_CLUSTER_ID,
+        DIRECTION_ATTRIBUTE_ID, aqara_utils.MFG_CODE, data_types.Boolean, reverseRollerShadeDirPrefValue))
+    end
+  end
+end
+
+local function device_added(driver, device)
+  device:emit_event(capabilities.windowShade.supportedWindowShadeCommands({ "open", "close", "pause" },
+    { visibility = { displayed = false } }))
+  window_treatment_utils.emit_event_if_latest_state_missing(device, "main", capabilities.windowShadeLevel,
+    capabilities.windowShadeLevel.shadeLevel.NAME, capabilities.windowShadeLevel.shadeLevel(0))
+  window_treatment_utils.emit_event_if_latest_state_missing(device, "main", capabilities.windowShade,
+    capabilities.windowShade.windowShade.NAME, capabilities.windowShade.windowShade.closed())
+  window_treatment_utils.emit_event_if_latest_state_missing(device, "main", initializedStateWithGuide,
+    initializedStateWithGuide.initializedStateWithGuide.NAME,
+    initializedStateWithGuide.initializedStateWithGuide.notInitialized())
+  device:emit_event(shadeRotateState.rotateState.idle({ visibility = { displayed = false } }))
+  device:send(cluster_base.write_manufacturer_specific_attribute(device, aqara_utils.PRIVATE_CLUSTER_ID,
+    aqara_utils.PRIVATE_ATTRIBUTE_ID, aqara_utils.MFG_CODE, data_types.Uint8, 1))
+
+  -- The direction is stored on the device and survives a re-pairing, so sync it with the preference
+  local reverse = device.preferences ~= nil and device.preferences[reverseRollerShadeDir.ID] == true
+  device:send(cluster_base.write_manufacturer_specific_attribute(device, aqara_utils.PRIVATE_CLUSTER_ID,
+    DIRECTION_ATTRIBUTE_ID, aqara_utils.MFG_CODE, data_types.Boolean, reverse))
+end
+
+local function do_configure(self, device)
+  device:configure()
+  do_refresh(self, device)
+end
+
+local aqara_roller_shade_t1s_handler = {
+  NAME = "Aqara T1S Blinder Controller Handler",
+  lifecycle_handlers = {
+    added = device_added,
+    doConfigure = do_configure,
+    infoChanged = device_info_changed
+  },
+  capability_handlers = {
+    [capabilities.windowShadeLevel.ID] = {
+      [capabilities.windowShadeLevel.commands.setShadeLevel.NAME] = window_shade_level_cmd
+    },
+    [capabilities.windowShade.ID] = {
+      [capabilities.windowShade.commands.open.NAME] = window_shade_open_cmd,
+      [capabilities.windowShade.commands.close.NAME] = window_shade_close_cmd
+    },
+    [shadeRotateState.ID] = {
+      [setRotateStateCommandName] = set_rotate_command_handler
+    },
+    [capabilities.refresh.ID] = {
+      [capabilities.refresh.commands.refresh.NAME] = do_refresh
+    }
+  },
+  zigbee_handlers = {
+    attr = {
+      [aqara_utils.PRIVATE_CLUSTER_ID] = {
+        [INIT_STATE_ATTRIBUTE_ID] = init_state_handler,
+      },
+      [WindowCovering.ID] = {
+        [WindowCovering.attributes.CurrentPositionLiftPercentage.ID] = current_position_lift_percentage_handler
+      },
+      [MULTISTATE_CLUSTER_ID] = {
+        [MULTISTATE_ATTRIBUTE_ID] = shade_state_report_handler
+      }
+    }
+  },
+  can_handle = require("aqara.roller-shade.t1s.can_handle"),
+}
+
+return aqara_roller_shade_t1s_handler