From afb04ff74b3b4ef29b152c8a9ca559303370d828 Mon Sep 17 00:00:00 2001 From: Mary Guillemard Date: Mon, 11 Nov 2024 14:20:58 +0100 Subject: [PATCH] Add notes about the Reclaimer Labs Board SBU1 and SBU2 aren't connected and VBUS_A should not be wired. Signed-off-by: Mary Guillemard --- README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 681145c..50e77f7 100644 --- a/README.md +++ b/README.md @@ -28,7 +28,9 @@ You can get away without decoupling and with only connecting one of the duplicat #### Reclaimer Labs Board Alternatively, you can also use the [Relaimer Labs](https://www.tindie.com/products/reclaimerlabs/usb-c-power-delivery-phy-breakout-board/) board. -* 1 VBUS → Arduino D4 +**NOTE: SBU1 and SBU2 aren't connected on the USB-C connector** + +* 1 VBUS → Arduino D4 (**not VBUS_A**) * 2 VPU → Arduino 3V3 * 3 VDD → Arduino 3V3 * 4 GND → Arduino GND